The IR-M2000 Series is fiber optic on-line moisture meters utilizing the infrared absorption of moisture. The sensing part is a fiber optics and can be installed at narrow space and high temperature environment.

Converting capabilities are built into the compact designed detector unit for easy installation and operation. Maximum 99 calibration curves can be stored into memory for many applications. The unit can be used by itself or by combining with personal computers as an analog output and a communication function are provided with.

A setting display unit connectable with maximum 9 detector units can set various kinds of setting items of the detector unit and displays moisture value.

Features

• High sensitive fiber optics
  The measurement is stable by high sensitive fiber optics. A reflection type fiber optics with lens can measure objects at long measuring distance.
• Compact sensor part
  The compact and lightweight sensing part using the fiber optics can be used at narrow spaces and places where the direct sighting is difficult.
• For location in environment at 150°C
  Any water-cooling in the environment at 150°C is not required by the heat-sensitive fiber optics.
• Setting display unit
  The setting display unit has a front panel of 96 x 96 mm and can connect with up to 9 sets of the detector unit. The communications interface between the setting display unit and the detector unit is by RS-485.
• Protective structure conforming to IP-65
  The enclosure of the detector unit and the front panel of the setting display unit conform to IP-65 for severe atmospheric condition.

Models

• Detector unit

• Fiber optics

* For liquid, a measuring cell for liquid is separately necessary.

• Setting display unit

Specifications

• Detector unit

Measuring system	Infrared reflection type 3-wavelength system
Moisture output	4 to 20mADC (Load resistance: less than 500)
Correction input	4 to 20mADC (option) (For correction of sample temperature, measuring distance, etc.)
Communications output	RS-485, RS-232C or RS-422A (to be specified) RS-485 for connection with the setting display unit
Output renewal cycle	28ms
Display	LED 5-digit Calibration curve number - LED 2-digit
Setting	By keys or communications
Calibration curve	Linear to cubic expression or broken line
Numbers of calibration curve	99 curves
Calibration curve correction	Zero and span correction
Calibration curve creation	Regression calculation
Calibration	By a checking plate
Smoothing	0 to 99 seconds
Working temperature range	0 to 50 °C(Air is necessary for more than 45°C.)
Rated supply voltage	24VDC
Power consumption	Maximum 36VA
Connection	Fiber optics - Connector connection Power supply/signal line -Terminal connection
Casing	Aluminum casing, drip-proof structure (conforming to IEC529 IP65)
Weight	About 4kg
Accessory	Power supply unit IR-WEP

• Fiber optics

Measuring distance and measuring diameter	Reflection type - 20mm at 15mm, 50mm at 50mm Reflection type with lens - 25mm at 25mm, 40mm at 100mm
Fiber length	Reflection type, Reflection type with lens - 1.5m (up to 10m) Transparent type - 2m (up to 20m)
Allowable bending radius	Reflection type, Reflection type with lens - R100mm Transparent type - R250mm
Working temperature range	0 to 150°C
Fiber protection	Stainless flexible tube
Purge air flow	Reflection type - 5 to 20Nl/min Reflection type with lens - Without air purge function

• Setting display unit

Detector unit input	RS-485, connectable with up to 9 detector units
Analog output	4 to 20mADC (Load resistance: less than 500), 2 outputs
Output renewal cycle	28ms x (quantity of detector unit)
Display	Data - LED 5-digit Calibration curve number - LED 2-digit Detector unit number - LED 1-digit
External setting	Setting of detector unit number, calibration curve number, calibration, preset output and hold by external contact
Alarm	High/low alarms, Contact 2 outputs (H-C-L)
Working ambient temperature	0 to 50°C
Rated supply voltage	100 to 240VAC 50/60Hz
Power consumption	Maximum 15VA
Casing	ABS resin, Front panel - Drip-proof structure (conforming to IP-65)
Weight	About 0.6kg

• Power supply unit

• Package software Contents

Page Top