• 99 kinds (maximum 1000 steps) program patterns
  Patterns consisting of maximum 99 steps can be stored into memory by maximum 99 kinds (maximum 1000 steps in total).
• Memory card
  Since a 64-Kbyte memory card is used, the contents being set to the program controller can be copied, and also, the setting contents in the card can be copied to the program controller for easy reduction of setting time and simple program pattern control every process. Program patterns can be extended up to 2000 steps when the card is used as an extension memory.
• Free program pattern configuration
  Program patterns can be set flexibly by partial repetition of program steps, repetition of entire patterns, linkage between mutual patterns, and endless linkage of patterns.
• Clear graphic display and interactive setting
  Owing to a large screen (30mm x 75mm) having the resolution of 40 x 96 dots, this program controller offers the collective or progressive display of program patterns and other versatile display functions as well as the interactive setting by UP/DOWN keys or ten keys.
• Preset of PID constants by auto tuning
  16 kinds of PID constants can be provided as built-in constants consisting of 8 kinds of PID constants optionally selectable every step and 8 kinds of PID constants automatically selectable according to the SV values, so that optimum program control can be executed over a wide temperature change.
• Multi-phenomenon programs by master/slave system
  A program run can be synchronized by one master unit and plural slave units to be able to execute the temperature-humidity (dry bulb, wet-bulb) control, temperature/pressure control, etc.

Models

Models (Input signals)			Control systems
Thermocouples/ DC voltage	Resistance thermometers	Resistance thermometers/ DC voltage/current
DP1110B000	DP1210B000	DP1310B000	On-off pulse type PID
DP1120B000	DP1220B000	DP1320B000	On-off servo type PID
DP1130B000	DP1230B000	DP1330B000	Current output type PID
DP1150B000	DP1250B000	DP1350B000	SSR drive pulse type PID
DP1160B000	DP1260B000	DP1360B000	Voltage output type PID

Measuring ranges

Input signals		Measuring ranges
Thermocouples	R	0 to 1760°C
	S	0 to 1760°C
	B	0 to 1820°C
	K	-200 to 1370°C
	E	-270 to 1000°C
	J	-200 to 1200°C
	T	-270 to 400°C
	N	0 to 1300°C
	WWRe5-26	0 to 2320°C
	WWRe0-26	0 to 2320°C
	PR20-40	0 to 1880°C
	PR5-20	0 to 1800°C
	Ni-NiMo	0 to 1310°C
	AuFe-Cr	0 to 300 K
	Platinel	-100 to 1390°C
	U	-200 to 400°C
	L	-200 to 900°C
DC voltage		-10 to 10mV, -20 to 20mV, -50 to 50mV,-100 to 100mV, -5 to 5V
DC current		-20 to 20mA
Resistance thermometers	Pt100	-200 to 649°C
	JPt100	-200 to 649°C
	Pt50	-200 to 649°C
	Pt-Co	4 to 374K

Specifications

Input signals	Thermocouples	B, R, S, K, E, J, T, N, WWRe5-26, WWRe0-26, Ni-NiMo, AuFe-Cr, PR5-20, PR20-40, Platinel, U, L
	DC voltage	± 10mV, ± 20mV, ± 50mV, ± 100mV, ± 5V
	DC current	± 20mA
	Resistance thermometers	Pt100, JPt100, Pt50, Pt-Co
Accuracy rating	±0.1% of input span ± 1 digit or 10µV, whichever is larger (With thermocouple inputs, reference junction temperature compensation accuracy is notincluded.)
Reference temperature compensation accuracy	±0.5°C
Sampling period	About 0.1 second
Burnout	Upscale burnout for thermocouple and mV inputs
	Output at burnout	Optional set value between -5% and 105% of control output
	At burnout	High alarm activation
Scaling	DC voltage and DC current inputs: Optional scaling within 5 digits
Displays	1st display part: 7-segment back-lit LCD 2nd display part: Full dot-matrix (96 x 40 dots) back-lit LCD
Power supply	85 to 264VAC, 50Hz/60Hz (universal power supply)
Ambient temperature	-10 to 50°C
Ambient humidity	Less than 90%RH (no dew condensation)
Power consumption	About 15VA
Weight	About 2kg
Program pattern setting system	Key switch setting at step configuration
Step configuration	One step is consisted of setpoint and time (setpoint/time system)
Number of steps	Maximum 99 steps/pattern
Number of program patterns	Maximum 99 patterns
Number of total steps	Maximum 1000 steps (2000 steps if the memory card is used as an extendedmemory.)
Number of program pattern repetitions	Maximum 9999 times
Number of program step repetitions	Maximum 99 times
Multi-setting item (Parameters to be selected for each step)	Setting items selectable (No. entry) for each step
	PID constants	8 kinds being fixed in step section and 8 kinds freely selectable in SV section (16 kinds in total)
	Alarm setpoint	8 sets, each consisting of 4 points
	Output limit	8 sets, each consisting of high and low
	Output change quantity limit	8 kinds
	Deviation value of actual temperature compensation	8 kinds
	Standby time for standby alarm	8 kinds
	Sensor correction value	8 kinds
	Time signal time	8 kinds, all OFF, all ON (10 kinds in total)
Control	Selection of program control or constant value control
Control switching cycle	About 0.1 second
Control system	Current output type PID, On-off pulse type PID, SSR drive pulse type PID,On-off servo type PID, Voltage output type PID
Auto tuning	4 systems are provided. PID constants are set automatically.
PID constants	P: 0 to 999.9% (0 for on/off control) I: 0 to 9999 seconds (0 for without reset action) D: 0 to 9999 seconds
Anti-reset windup	High 0 to 50.0%, Low (-) 50 to 0%
Current output type	Output signal	4 to 20mADC
	Load resistance	Less than 750
On-off pulse type PID	Output signal	On-off pulse conductive signal
	Contact capacity	Resistive load: 100VAC less than 2A, 200VAC less than 1A Inductive load: 100VAC less than 1A, 200VAC less than 0.5A Minimum load: more than 5VDC 10mA
	On-off pulse period	Variable between about 1 to 180 seconds
SSR drive pulse PID	Output signal	On-Off pulse voltage signal ON: 12VDC ± 10% (maximum 20mA) OFF: Less than 0.6VDC
	On-off pulse period	Variable between about 1 to 180 seconds
On-off servo type PID	Output signal	On-off servo conductive signal
	Contact capacity	Inductive load: 100VAC 1A, 200VAC 0. A Minimum load: more than 5VDC, 10mA
	Feedback resistance	100 to 2k
Voltage output type PID	Output signal	0 to 10VDC (load resistance more than 10k
Alarm points	4 points
Alarm system	Selection for each setpoint from 8 kinds High/low alarms and deviation/absolute-value alarms With standby function.
Alarm outputs	Relay contact output
	Contact capacity	Resistive load: 100VAC 0.5A, 200VAC 0.2A Minimum load: more than 5VDC, 10mA
Memory car	Solid-state memory (S-RAM) Memory capacity: 64kB Backup: Data by lithium battery (RC25) for about 5 years
Communications interface	RS-232C, RS-422A (option)

Page Top

BACK