Recorders / Loggers Hybrid Recorders BL Series Hybrid Recorders     The BL Series is easy-to-operate hybrid recorders to record a variety of information in analog and digital formats on a 100mm wide chart. Dot-printing types and pen-writing types are available. The recorders are provided with the scale plate conforming to its input types and measuring inputs to be able to read measured values directly, and also these values are indicated on the digital display. The compact BL Series recorders have depth of only 195mm (dot-printing type and 1-pen type) which makes them suitable for space sensitive installations including panel mounting. Features Ready to run immediately As the recorders are preset to meet individual customer specifications and precise application requirements, the recorders start indicating and recording as soon as they are switched on. Displays for accuracy and simplicity Measured values can be read at a glance, directly from the scale plate whilst a digital display clearly indicates measured values, alarm settings and chart speed together with a range of other information. Compact and easy to install The BL recorders are designed for use in applications where space is at a premium. With a reduced depth of 195 mm (dot-printing type and 1-pen type) and weighing 2.6 kg (dot-printing type), the instruments are ideally suited for panel mounting installations. Detachable terminal board for easy wiring A detachable terminal board is provided to enable convenient on-site connection of the cable. Abundant options Abundant options including communications interfaces (RS-422A, RS-232C or RS-485), external drive and alarm outputs are available. CE (option) The models complying with CE are available. Models Types Recording points Single ranges Individual ranges Thermocouples/ DC voltage Resistance thermometers Thermocouple/ DC voltage Resistance thermometers Dot 6-point BL160-NDN BL260-NDN BL560-NDN BL660-NDN Pen 1-pen BL1E00-NDN BL2E00-NDN -- -- 2-pen BL1F10-NDN BL2F20-NDN -- -- 3-pen BL1G11-NDN BL2G22-NDN -- -- On pen-writing types (2-pen and 3-pen), input signals can be specified on each pen individually. Specifications Measuring points Dot-printing type 6 points Pen-writing type 1-pen, 2-pen or 3-pen Input signals DC voltage ±7mV, ±14mV, ±25mV, ±70mV, ±5V DC current Applicable by adding a shunt resistor (100, 250) Thermocouples B, R, S, K, E, J, T, N, Ni-NiMo, AuFe-Cr, PR5-20, PR20-40, WWRe5-26, WWRe0-26, Platinel, U, L Resistance thermometers Pt100, JPt100, Pt50, Pt-Co Accuracy ratings Digital displays and printing Thermocouples, resistance thermometers ±0.3% of the scale range ± 1 digit or ± 1°C, whichever is larger DC voltage ±0.2% of the measuring range ± 1 digit Analog indication ±0.5% of the scale range Note: For thermocouple inputs, the reference junction compensating accuracy is excluded. Measuring cycles Dot-printing type About 5 seconds/6-point Pen-writing type About 125ms Reference junction compensating accuracy K, E, J, T, N, Platinel: Maximum ±0.5°C R, S, Ni-NiMo, AuFe-CR, WWRe5-26, WWRe0-26, U, L: Maximum ±1.0°C Dot-printing cycle About 5 seconds/point (when the chart speed is faster than 6mm/h.) Printing systems Dot-printing type Trace and digital printings: Wire dot system 6-color ribbon Pen-writing type Trace printing: Cartridge pen Digital printing: Plotter pen Printing colors Dot-printing type Trace printing Red, black, blue, green, brown, purple Digital printing Periodic digital data printing: Repetition of 6 colors Digital data printing: Repetition of 6 colors Date and time printing: Black Scale and point No.: Same colors as dot printing colors Chart speed: Black Alarm activation/reset: Red (option) Programming change mark: Black Pen-writing type Trace printing 1st pen: red, 2nd pen: green, 3rd pen: blue Digital printing Purple (Periodic digital data printing, digital data printing, date/time printing, Scale/chart speed/programming change mark/optional alarm activation/reset printing) Chart Fan-fold type 114mm total width, 10m total length, 100mm effective printing width Chart speed 1 to 1500mm/h for dot-printing type 1 to 599mm/h, 10 to 200mm/min for pen-writing type Balancing speed About 2 seconds (pen-writing type) Periodic digital data printing Time, point No., measured values, and engineering units are printed on trace printing at every specified time interval. Digital data printing Time, point No., measured values, and units are printed at the request time by interrupting trace printing. Alarm activation and reset printing Time, point No., alarm type and level are printed on the right side of thechart when an alarm activates. Time, point No., and level are printed on the right side of the chart when the alarm was reset. * In case alarms are specified on ordering. Display items Multi-point sequential display, 1-point continuous display, and clock display are switched. Alarm type Absolute alarms, differential alarms, rate-of-change alarms (to be specified on ordering) Alarm setting Individual setting on each point, Up to 4 alarm levels/point) (to be specified on ordering) Rated supply voltage 90 to 120VAC, or 180 to 240VAC (to be specified) Rated supply frequency 50Hz/60Hz (selectable by DIP switches) Scale plates Dot-printing type Up to triple scale, minimum 80 equal divisions Pen-writing type Up to dual scale, minimum 80 equal divisions Maximum power consumption Dot-printing type 45VA Pen-writing type 1-pen: 30VA, 2-pen: 35VA, 3-pen: 40VA Working temperature range 0 to 50°C Working humidity range 20 to 80%RH Weight Dot-printing type About 2.6kg Pen-writing type 1-pen: about 3.0kg, 2-pen: about 4.0kg, 3-pen: about 4.5kg CE (option) EN61326 + A1 Class A, EN61000-3-2 + A14 EN61000-3-3, EN61010-1 + A2 *PDF data sheet is available at "Download Center". Page Top BACK