Infrared Radiation Thermometers On-Line Type IR-SA Series On-Line Infrared Radiation Thermometer     The IR-SA series of Infrared Radiation Thermometer provides broad selection of small & robust units to match your on-line applications for non-contact temperature measurement from 0 to 2500°C under harsh environment. Four models are available with modbus connectivity for parameter setup through remote setting unit or PC. Features Small but robust on-line thermometer Withstand temperature 90°C, IP67, CE approval Fast response time of 0.002sec for IR-SAI/IR-SAS RS485 modbus connectivity Telescope or laser pointer for targeting IR-GZ enables remote monitoring and parameter setup Abundant mountings and accessories for on-line applications Models Models Types Low temperature IR-SAB Medium temperature IR-SAI High temperature IR-SAS Two-color type IR-SAH Connectivity Specifications Low temperature Medium temperature High temperature 2-color type Model IR-SAB IR-SAI IR-SAS IR-SAH Element PE InGaAs Si Si/InGaAs Measuring wavelength 8 to 14µm 1.55µm 0.9µm 0.9/1.55µm Measuring range 0 to 1000°C 300 to 1600°C 600 to 2500°C 900 to 2500°C Accuracy rating 200°C or less: ±2°C 200°C or more: ±1% of measuring value 1000°C or less: ±0.2% of measuring value ±2°C 1000 to 1500°C: ±0.4% of measuring value 1500°C or more: ±0.5% of measuring value 1500°C or less: ±0.5% of measuring value 1500°C or more: ±0.6% of measuring value Resolution 0.5°C 1°C Response time (95%) 0.2s 0.002s 0.01s Optics Fixed focus lens type Sighting Laser unit Telescope or laser pointer Parameter setup Through RS485 Emissivity adjustment (2-color: emissivity ratio) 1.9999 to 0.200 1.9999 to 0.050 1.250 to 0.750 Analog output 4 to 20mA DC isolated output Output scaling: Programmable in measuring range Working temperature 0 to 50 °C 0 to 90°C Power supply 24V DC±10% Power consumption Approx. 5.0VA Approx. 2.4VA Protection IP67 Weight Approx. 0.7Kg Standards CE approval, RoHS directive Measuring diameter & distance Setting display unit IR-GZ The IR-GZ is combined with the IR-SA for enabling parameters setup, data display and 24V DC power supply to the IR-SA. Specifications Emissivity (ratio) setting 1.999 to 0.000 Thermometer input RS485 Signal modulation DELAY,PEAK Display Temperature, Thermometer number being connected, Status display Analog output Output 1: 4 to 20mA DC (IR-GZ output) Output 2: 4 to 20mA DC (IR-SA) Event output 2 points Communications interface RS232C (Optional) or RS485 (Optional) Power supply to IR-SA 24V DC Power supply 100 to 240V AC, 50/60Hz Power consumption Maximum 20VA Working temperature -10 to 50°C Working humidity 20 to 90%RH (No dew condensation) Weight Approx 0.5Kg CE marking EMC directive EN61326+A1 Low voltageENN61010-1+A2 Overvoltage category II,Pollution level 2 *PDF data sheet is available at "Download Center". Page Top BACK