LT110 Series Digital Indicating Controller

LT110 series is 48×24mm size compact indicating controller. It is suitable for various systems such as semiconductor manufacturing equipment, electronic parts manufacturing equipment, food processing machine, packaging machine, molding machine etc.

  • Compact, lightweight, and space-saving
    The controller is vary small so it is effective for down sizing systems and control panel.
  • Full multiple range
    Thermocouples 5-types, and RTD 4-types, multiple range input is available.
  • PID auto tuning function
  • Various functions convenient for temperature control
    Functions such as sensor correction, set value lock, set value limit, control output OFF, alarm activation delay timer etc.
  • Conforming to CE marking and IP-65.
    The controller is conforming to European safety standard CE marking and front part complies with IEC standard IP65 dust and drip proof structure.



Models Specifications
LT11010000-00A Full multiple input/ON-OFF pulse type
LT11030000-00A Full multiple input/Current output type
LT11050000-00A Full multiple input/SSR drive pulse type
LT11110000-00A Thermocouples multiple input/ON-OFF pulse type
LT11130000-00A Thermocouples multiple input/Current output type
LT11150000-00A Thermocouples multiple input/SSR drive pulse type

Measuring Range

Input Type Input Range
Thermocouples K 0 to1370°C
J 0 to1000°C
E 0 to 800°C
Platinel II 0 to1390°C
N 0 to1300°C
RTDs Pt100 -199.9 to 850.0°C
-200 to 850°C
JPt100 -199.9 to 500.0°C
-200 to 500°C


Input Specifications

Input Signal Thermocouples…K, N, J, E, Platinel II
RTDs…Pt100, JPt100
Accuracy Rating Thermocouple input…±0.3% of input span ±1digit or ±2°C whichever is greater
RTD input…±0.2% of input span ±1digit
Temperature Measuring Unit °C
Sampling Cycle Approx. 0.25sec.
Burnout Higher limit burnout comes as a standard
Allowable Signal Source Resistance Thermocouple input…100Ω or less
RTD input…10Ω or less for 1-wire
Measurement Input Shift
(Sensor Correction)
-100.0 to100.0°C

Control Specifications

Control Switch Cycle Approx. 0.25sec.
Control System PID (2-position control is also available)
Auto Tuning Standard (PID constant setting can be done manually)
PID values P…0 to each range max. value
I…0 to 3600sec.
D…1 to 3600sec.
Control Gap 0.1 to100.0°C (only for 2-position control)
Anti-Reset Windup Auto
Output Specifications ・ON-OFF pulse type
Output signal…ON-OFF pulse conductive signal
Contact capacity…Resistive load 250V AC 3A
Inductive load 250V AC 1A
ON-OFF pulse cycle…Approx. 1sec. to120sec. adjustable
・Current output type
Output signal…4to20mA DC
Load resistance…550Ω or less
・SSR drive pulse type
Output signal…Pulse voltage signal
At ON 12V DC ±(0 to +2V) max. 40mA
Pulse cycle…Approx. 1sec. to 120 sec. adjustable

Alarm Specifications

Alarm Point 1-point
Temperature Alarm Type Deviation high alarm, deviation low alarm
Absolute value deviation high alarm, absolute value deviation low alarm
Deviation high alarm with standby function
Deviation low alarm with standby function
Absolute value deviation high alarm with standby function
Absolute value deviation low alarm with standby function
Absolute value high alarm, absolute value low alarm
Absolute value high alarm with standby function
Absolute value low alarm with standby function
Loop Break Alarm Alarm is activated when the control output is max. or mini. and the process value does not change more than a set band within a set time.
Heater disconnection, sensor disconnection, control equipment failure detection
  • Alarm time setting range…0 to 200min.
  • Alarm band…0 to 150°C or 0.0 to 150.0°C
Alarm Deadband 0.1 to100°C
Alarm Output Open collector 24V DC 0.1A (max.)

Display Specifications

Display System LED 4-digit
Display Contents PV and SV switch Various parameter set contents

General Specifications

Power Supply Voltage 100V-240V AC 50/60Hz universal power supply
Working Temperature Range 0to50°C, 35 to 85%RH (no dew condensation)
Power Consumption Approx. 5VA
Installation Panel installation
Weight Approx. 100g