R060 Series Surface Temperature Sensors (Resistance Thermometer)

R060 is a surface temperature measurement sensor using platinum resistant element for detecting element. It gives minimum heat disturbance to measuring object surface. There are general purpose type, flexible type, and high temperature measurement type etc. available depending on the measurement condition.

  • General purpose type
    A platinum resistant element is completely molded with silicone rubber and put in the brass case. It has excellent performance on moisture proof and impact resistance.
  • Flexible type
    A platinum resistant element is molded with silicone rubber, so it has excellent performance on flexibility. This very thin type sensor can measure the temperature in a range of -50˚C to 250˚C with high accuracy.
  • High temperature measurement type
    A platinum resistant element is enclosed by brass case, and alumina porcelain is used for lead wire fixtures to provide heat-resistant structure. This sensor can measure the temperature up to 500˚C.
  • Small reinforced type
    A platinum resistant element is embedded in copper disc with good thermal conductivity and has excellent mechanical strength. In addition, lead wire is fixed with heat resistant resin, so it is tough against disconnection.

 

Models

General purpose type

Model Measuring Range (°C) Tip Size Length×Width×Thickness (mm) Specifications
Pt100 JPt100
R060-31 R060-11 -50 to 250°C 18×30×2.5 For medium to high temperature・in a metal case

Flexible type

Model Measuring Range (°C) Tip Size Length×Width×Thickness (mm) Specifications
Pt100 JPt100
R060-32 R060-12 -50 to 250°C 14×25.5×0.8 Silicone rubber mold
R060-35 R060-15 20×50×4 R060-□2 Mold reinforced type (large)
R060-36 R060-16 15×30×5 R060-□2 Mold reinforced type (medium)
R060-37 R060-17 -50 to 150°C 10×20×3 R060-□2 Mold reinforced type (small)

Small flexible type

Model Measuring Range (°C) Tip Size Length×Width×Thickness (mm) Specifications
Pt100 JPt100
R060-33 R060-13 -50 to 150°C 8×12.5×1 Silicone rubber mold

SHigh temperature measurement type

Model Measuring Range (°C) Tip Size Length×Width×Thickness (mm) Specifications
Pt100 JPt100
R060-34 R060-14 -30 to 500°C φ7×1.5 Copper disc resin molded

Specifications

Resistance Element Pt100, JPt100 3-wire
Tolerance JIS class B
Measuring Current 2mA
Lead Wire With 2m
Mounting on Curved Surface Only available for R060-□2, -□3, -□5, -□6
(Minimum bending radius 20mm)

*For other specifications, refer to the catalog.